Guide To Flash (Update) Wiko Lenny 4 Plus Android V12 Nougat Via Wiko Flashtool
INFO/
Why you need to flash (restore the original rom):
you need to flash your Wiko phone in this possible cases:
Step 1: Preparation
Turn off the phone (its battery must be fully charged)
Micro USB cable (supplied in the box)
CAUTION! Before you begin the update of your phone, be sure to back up all your personal data (save all your contacts in your SIM card and your pictures on your PC). The upgrade erases all data and resets your phone.
Step 2: Download update package
Choose your languages:
Enter Wiko phone Imei (the box on back or under battery or just type ∗#06# on phone dialler then check Captcha and Press OK):
Step 3: Launching the update software
Extract the installation file on your desktop
A security message appears on your screen, click "Install this driver anyway" in or-
der to load the driver. (See image below)
If driver didn't install automatically, then fellow our guide to install neccessary flash driver manually From Here.
An installation window opens, (the installation may take up to 5 minutes)
2. When the « Download» button turns green connect your turned off phone to
your PC using the USB cable.
4. The update is now completed, disconnect the phone from your PC. Restart your phone.
Congratulations!
You have completed the update.
- Brand: Wiko
- ProdModel: Lenny4 Plus
- AndroidVer: Nougat 7
- MTKxCPU: Mtk MT6582
- A Wiko original usb cable.
- Phone must be charged up to 70% to avoid unexpected issues during the flash process.
- You need a Laptop or PC to perform this Action.
- Download the right firmware for your Mtk Smartphone from the link bellow.
- Make sure you have followed the steps properly. Don’t Skip and Read!
- We are not responsible for any damage that you make to your Phone.
Why you need to flash (restore the original rom):
you need to flash your Wiko phone in this possible cases:
- Get latest official update for your Wiko smartphone.
- System is slow and crash all the time.
- Unwanted applications (installed without permisson & take a place within system apps).
- Sexual Contents and apps.
- Remove different locks such as pattern, pin, password, Gmail.
- Phone restarts
- If you think you need to flash Wiko phone for any other reason, just fellow our guide carefully.
Step 1: Preparation
Turn off the phone (its battery must be fully charged)
Micro USB cable (supplied in the box)
CAUTION! Before you begin the update of your phone, be sure to back up all your personal data (save all your contacts in your SIM card and your pictures on your PC). The upgrade erases all data and resets your phone.
Step 2: Download update package
From nowone Wiko company creates a firmware database
Go to te wiko official support website FROM HERE
Choose your languages:
Enter Wiko phone Imei (the box on back or under battery or just type ∗#06# on phone dialler then check Captcha and Press OK):
If your phone has a new update, a bleu box contains download link will appear
Step 3: Launching the update software
Extract the installation file on your desktop
Run the installation software
der to load the driver. (See image below)
If driver didn't install automatically, then fellow our guide to install neccessary flash driver manually From Here.
Step 4: Installing the update
1. When the software starts, click "Download Button"
1. When the software starts, click "Download Button"
2. When the « Download» button turns green connect your turned off phone to
your PC using the USB cable.
Download mode: Just fully power off phone & plug usb cable in.
3. The update process begins ...
Congratulations!
You have completed the update.
This is dummy text. It is not meant to be read. Accordingly, it is difficult to figure out when to end it. But then, this is dummy text. It is not meant to be read. Period.