FIRMWARE ECHO FLOW Marshmallow 6.0
TESTED FIRMWARE
TESTED FIRMWARE
FREE DOWNLOAD
EXCLUSIVE IS FOR FREE NOW
INFO:
- Model Name: sp9832a_2h11_4mvoltesea
- Model Brand: HN
- Model Device: sp9832a_2h11_volte
- AndrVersion: 6.0
- BaseBand CPU: SP9832A_2H11_VOLTE
- Project Ver: ECHO_FLOW_V15_20170830
- Model Ext: FLOW
PRE-REQUISITE
- This is for Echo Flow only.
- Your device must have 70% Of battery.
- You need a Laptop or PC to perform this Action.
- Download the right firmware for Echo Flow from the link bellow.
- Make sure you have followed the steps properly. Don’t Skip and Read!
- We are not responsible for any damage that you make to your Phone.*
WHY YOU NEED TO FLASH YOUR PHONE!!
You need this firmware/stock rom if you have encountered this kind of problem in your Smartphone Listed Below:
1.Hang on logo.
2.Rebooting.
3.Bootloop & Dead boot after a wrong software.
4-Virus & Sexual Apps.
5-System crashing
2.Rebooting.
3.Bootloop & Dead boot after a wrong software.
4-Virus & Sexual Apps.
5-System crashing
How to know if the phone had a hard problem (Emmc problem)??
- What is Emmc problem? also called read mode only, it means that your internal memory doesnt accept command, so the phone stay on the same condition after a software or a hard reset.
- if the phone hang on logo after flash, you ara facing Emmc problem.
- As a precaution you shouldn't change setting in SP flashtool from Download only to format+download, you will end with a dead phone if you have a Emmc problem ofcourse.
DOWNLOAD AREA:
Firmware Download Link: FROM HERE
Password For Firmware: www.firmwares-mobile.comHOW TO FLASH:*
Use CM2SPD
This is dummy text. It is not meant to be read. Accordingly, it is difficult to figure out when to end it. But then, this is dummy text. It is not meant to be read. Period.