Guide To Install Stock Rom Samsung Galaxy Note 8 Pie 9 Odin Method Tested Firmware, Free Regional Firmwares Ready To Be Downloaded For SM-N950W Canada
Before you can proceed to the process make sure that you do the things we will list below and that you read it carefully, this procedure works perfectly and tested by many users, so if you have doubt or questions about this post you can leave a comment below:
- Prepare your USB Cable, PC, STOCK ROM or Firmware Files (Download Below).
- Flashing the Stock Firmware will delete your personal data from the device. If in case you are going to Flash the above firmware then take a backup of your personal data, so that you can recover your personal data if any thing wrong happens.
- Also doing this process is crucial so we admit you have a presence of mind, common sense, and read our disclaimer below, as well as make sure you have at least 60% to 80%.
Why Need Stock Firmware?
- Flashing Stock ROM will downgrade your phone if you don’t like the new update.
- Flashing Stock ROM will Upgrade your phone.
- Flashing Stock ROM will fix boot-loop issues.
- Flashing Stock ROM will completely Un-root .
- Installing Stock ROM will Unbrick.
- Flashing Stock ROM will help to Revert back to Original Stock ROM Firmware or Factory state (Helpful if you are facing force close error or any other lags or unstable internet connection).
Before starting the flashing process of this new update you need to read the following guidelines:
- Use this tutorial only with the Samsung Galaxy Note 8 models.
- do not use the tutorial for other different models.
- download Samsung Smart Switch or Samsung USB drivers From Here in order to get latest Samsung drivers.
- the USB drivers will allow your PC to detect the phone when these two are connected.
- If your phone boot to normal mode without any problem and you want to update android version, you need to activate OEM mode from developer options.
- the Developer Options might be hidden which is why you have to show it up first: go to Settings, Click About Phone and press seven times on the build Number text.
- get back to Settings, find Developer Options and then enable OEM Mode.
- If you phone doesn't boot to normal mode, stuck on logo you can ignore OEM mode.
- the update can be applied over rooted devices, but you need to know that root access won’t survive the update process.
- Also, any custom Recovery you might have installed is going to be replaced with stock Recovery image.
- you can flash the new official Pie firmware over custom ROM's, too, but you will have to Factory Reset the device after the update is done.
- the Factory Reset will wipe clean system partition, it removes the custom ROM, but it won’t delete any files from internal storage.
- Factory Reset process steps are listed at the end of this post.
- If the phone is running 100% official Android firmware, then you can continue straight to the next part of this post.
- this tutorial needs to be used by advanced users, we cannot be blamed in case you brick the phone nor in case you lose any data in the process.
- -read whole post and do not skip any steps.
DOWNLOAD AREA:
All available carrier you will find in download link:
*If you do not know which carrier do you have inside your phone, just flash the global version.
- Canada (SPC)
- Canada (XAC)
- Canada (Bell Mobile) (BMC)
- Canada (chatr) (CHR)
- Canada (EastLink) (ESK)
- Canada (Fido Mobile) (FMC)
- Canada (Globalive Wind Mobile) (GLW)
- Canada (Koodo Mobile) (KDO)
- Canada (Rogers) (RWC)
- Canada (SaskTel) (BWA)
- Canada (Telus) (TLS)
- Canada (Videotron) (VTR)
- Canada (Virgin Mobile) (VMC)
- (MTB)
FIRMWARES DOWNLOAD LINK :
SM-N950W PIE 9 From Here
Usefull Fact: To Fix Odin Fail For Galaxy Note 8, just choose the latest firmware by date, then you are good to go.
Download Latest Odin Version 3.13.1.pie From Here.
Install Smart Switch for install latest samsung drivers from here.
INSTALLATION TUTORIAL: How to flash android pie 9 on samsung galaxy using odin
INSTALLATION TUTORIAL: How to flash android pie 9 on samsung galaxy using odin