calme c5 flash file 100% Tested File Downloads Free By modernmobile42.com
SC6531_SPI_GIGADEVICE_GD25Q_4MiB
Card found : CEA8927D , v0138Infinity-Box Chinese Miracle II : SC/RDA Module [SCR] v1.04
SCRD mode : AUTOSPRD mode : SC6530 : REV : 0000 : NOR : [ 4MB-8MB ]
SPRD mode : SC6531 : REV : E001 : NOR : [ 4MB-8MB ]
Operation : Read UserCode [ v1.04 ]
MODE : From Device1. Power off device2. Press and hold BootKey or use BootCable3. Insert cable and battery in device!
Wait for device ...
Device Connected!BootVersion : SPRD3BootSource : InternalLibraryBootVersion : Infinity SCR 6531EFM v1.1 (c)2022ERROR : Baud set failed! Use default!FDL Flash : Control transfered!
Boot Done!
Error : PMT info not found! Damaged device MCU code!Send log and report.log to support! Include device info also!
Reconnect Power/Cable!
Operation : Read UserCode [ v1.04 ]
MODE : From Device1. Power off device2. Press and hold BootKey or use BootCable3. Insert cable and battery in device!
Wait for device ...
Device Connected!BootVersion : SPRD3BootSource : InternalLibraryBootVersion : Infinity SCR 6531EFM v1.1 (c)2022Port speed : 921600FDL Flash : Control transfered!
Boot Done!
CS0_MEM : SPI : [GIGADEVICE] : GD25Q32 : 0x00400000 [ 4MiB ]
Reading data ... Sorting data ... STATE : NOT ACTIVE : CODE : 0000
Done!Elapsed: 00:00:32
Reconnect Power/Cable!
SPRD mode : SC6530 : REV : 0000 : NOR : [ 4MB-8MB ]
SPRD mode : SC6531 : REV : E001 : NOR : [ 4MB-8MB ]
Operation : Read Flash [ v1.04 ]
1. Power off device2. Press and hold BootKey or use BootCable3. Insert cable and battery in device!
Wait for device ...
Device Connected!BootVersion : SPRD3BootSource : InternalLibraryBootVersion : Infinity SCR 6531EFM v1.1 (c)2022Port speed : 921600FDL Flash : Control transfered!
Boot Done!
CS0_MEM : SPI : [GIGADEVICE] : GD25Q32 : 0x00400000 [ 4MiB ]
Read Ok, 4194304 bytes
Done!Elapsed: 00:01:07
Reconnect Power/Cable!
Card found : CEA8927D , v0138
Infinity-Box Chinese Miracle II : SC/RDA Module [SCR] v1.04
SCRD mode : AUTO
SPRD mode : SC6530 : REV : 0000 : NOR : [ 4MB-8MB ]
SPRD mode : SC6531 : REV : E001 : NOR : [ 4MB-8MB ]
Operation : Read UserCode [ v1.04 ]
MODE : From Device
1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
BootSource : InternalLibrary
BootVersion : Infinity SCR 6531EFM v1.1 (c)2022
ERROR : Baud set failed! Use default!
FDL Flash : Control transfered!
Boot Done!
Error : PMT info not found! Damaged device MCU code!
Send log and report.log to support! Include device info also!
Reconnect Power/Cable!
Operation : Read UserCode [ v1.04 ]
MODE : From Device
1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
BootSource : InternalLibrary
BootVersion : Infinity SCR 6531EFM v1.1 (c)2022
Port speed : 921600
FDL Flash : Control transfered!
Boot Done!
CS0_MEM : SPI : [GIGADEVICE] : GD25Q32 : 0x00400000 [ 4MiB ]
Reading data ...
Sorting data ...
STATE : NOT ACTIVE : CODE : 0000
Done!
Elapsed: 00:00:32
Reconnect Power/Cable!
SPRD mode : SC6530 : REV : 0000 : NOR : [ 4MB-8MB ]
SPRD mode : SC6531 : REV : E001 : NOR : [ 4MB-8MB ]
Operation : Read Flash [ v1.04 ]
1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
BootSource : InternalLibrary
BootVersion : Infinity SCR 6531EFM v1.1 (c)2022
Port speed : 921600
FDL Flash : Control transfered!
Boot Done!
CS0_MEM : SPI : [GIGADEVICE] : GD25Q32 : 0x00400000 [ 4MiB ]
Read Ok, 4194304 bytes
Done!
Elapsed: 00:01:07
Reconnect Power/Cable!
Password:modernmobile42.com
Downloads Firmware Free Please Feedback by Comments.
This is dummy text. It is not meant to be read. Accordingly, it is difficult to figure out when to end it. But then, this is dummy text. It is not meant to be read. Period.