Guide to flash Condor Tab TFX-711G MT6580 Marshmallow 6.0 Tested method Free via flashtool

GUIDE TO FLASH CONDOR TAB TFX-711G MARSHMALLOW 6.0 FREE FIRMWARE DOWNLOAD

FLASH CONDOR TAB TFX-711G MARSHMALLOW 6.0




PRE-REQUISITE
This is for Condor Tab TFX-711G only.
*Your device must have 70% Of battery.
*You need a Laptop or PC to perform this Action.
*Download the right firmware for Pixi4 from the link bellow.
*Back Up your Data to make sure you have data’s in case if something Wrong
(This Process won’t loose your data)
*Make sure you have followed the steps properly. Don’t Skip and Read!
 * We are not responsible for any damage that you make to your Phone.

WHY YOU NEED TO FLASH YOUR PHONE!!
You need this firmware/stock rom if you have encountered this kind of problem in your Smartphone Listed Below:
1.Hang in logo
2.Rebooting
3.Bootloop
4-Virus Apps
5-Deadboot Recovery
6-Frp (Factory Reset Protection) 

Remarque: For Frp unlock use format+download instead download only
All needed partitions are there.
*Avoid to flash Boot files & Preloader if your phone is not dead
check only system, userdata, cache & unckeck other files.

*If you have deadboot or bootloop check all files.

How to know if the phone had a hard problem (Emmc problem)??
if the phone hang on logo after flash.
with the firmware file given you will avoid deadboot


INFO:
🔻🔻
Wait for phone...
Phone found! [ 91 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 8801034E43617264203904627B5963A5
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x88 , OEM : 0103
[eMMC] : FLASH_INF : [FORESEE] , draC
[eMMC] : FLASH_CID : 8801034E43617264203904627B5963A5
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001CE100000
[eMMC] : FLASH_UCP : 7393 MiB [eMMC 8 GiB]
DEV RID    : 0x55165990E3BA98269FDF4167F3D95B0E
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!

Brand     : Condor
ProdName  : TFX711G
ProdModel : TFX711G
Device    : elink8321_tb_m
AndroidVer: 6.0
MTKxCPU   : MT6580
MTKxPRJ   : alps-mp-m0.mp1-V2.52_elink8321.tb.m

SECURITY :
IMEI_SW [1] : 351983080554084
IMEI_SW [2] : 351983080554092
BTMAC Addr  : 54EF921A0589
WiFi MAC    : C8AE9C485EE4

MODEM :
BaseBand  : MT6580_S00_MOLY_WR8_W1449_MD_WG_MP_V41_1_wg_n

EXTRA :
LCD : Not info available :(
LCD Res : 600x1024
TOUCH [0] : GSLX688
CAM [0] : ov8858_mipi_raw
CAM [1] : gc5024_mipi_raw
CAM [2] : hm5040_mipi_raw
CAM [3] : gc5004_mipi_raw
CAM [4] : ov5648_mipi_raw
CAM [5] : gc5005mipi_raw
CAM [6] : gc2365mipi_raw
CAM [7] : gc2755_mipi_raw
CAM [8] : gc2145_mipi_yuv
CAM [9] : gc2155_mipi_yuv
CAM [10] : gc2235_mipi_raw
CAM [11] : gc2355_mipi_raw
CAM [12] : ov2680_mipi_raw
CAM [13] : hm03d5_mipi_yuv
CAM [14] : gc0310_mipi_yuv
MODEM : elink8321_hspa_tb_W4
LOCALE : en_US zh_CN zh_TW es_ES pt_BR ru_RU fr_FR de_DE tr_TR vi_VN ms_MY in_ID th_TH it_IT ar_EG hi_IN bn_IN ur_PK fa_IR pt_PT nl_NL el_GR hu_HU tl_PH ro_RO cs_CZ ko_KR km_KH iw_IL my_MM pl_PL es_US bg_BG hr_HR lv_LV lt_LT sk_SK uk_UA de_AT da_DK fi_FI nb_NO sv_SE en_GB hy_AM zh_HK et_EE ja_JP kk_KZ sr_RS sl_SI ca_ES


DOWNLOAD AREA:
FIRMWARE DOWNLOAD LINK: FROM HERE
PASSWORD: FROM HERE
DOWNLOAD FLAASH TOOL: SP_Flash_Tool_v5.1516
DRIVERS DOWNLOAD LINK: FROM HERE



Fellow Video Instructions:
⧭⧭⧭⧭⧭




How To Flash Via SP FLASHTOOL?

1-Requirements:
    • A Computer PC Run Windows XP or above
    • Usb data cable (not a generic cable)
    • Mtk usb drivers installed manually, you will find instruction bellow
    • Your Mtk Smartphone Face a soft issue
    • Original stock rom (you can find it above in download section)
    • The latest SP Flashtool version

    2-How to install VCOM Drivers:
    • Open device manager from my PC or my computer.
    • Click on any item and go to actions > Add legacy hardware
    • Now, press next and select install drivers manually
    • Press next and click on have disk
    • from the browse option, select VCOM drivers From mtk drivers folder
    • Once its done. You will see a screen similar to this:




    • Once you are done with the driver installation, go to device manager > Ports (COM&LPT) you will find a device similar to this:



    3-How to flash rom using SP Flashtool?:

    • Power the phone off, remove the battery from the smartphone and put it back without booting the phone (if the battery is inside then simply switch it off).
    • Launch SP Flashtool 

    *Double clicks onFlash_tool.exe
                                           *Press OK






    • Click on scatter-loading option and browse to the scatter file of your stock rom choose MTxxxx_android.txt (scatter.txt).




    • Dont touch any options, Keep the original setting (In case you want to format device before flash press choose format+download but it'snt recommanded because you will be ended with an EMEI null)
    • If you phone is alive and has a software issue (contain virus, Stuck on logo, apps setting problem, blink, or not work as expected) I advise you to Uncheck Preloader as a precaution. On contarary check all pertitions if you have a boot problem (you phone does'nt boot when you try to power on it).
                                   

    • Once you are done with everything, click on the download button at the top of the software.



    Stop should now be prominent while other options should be grayed out


    • Connect your switched off phone with battery inside to PC via Usb cable
    • A progressbar should start running


    • In the end of an success flash process, a box should show up with green OK symbol inside


    • Disconnect the phone, remove the battery, slot it back in then power the phone.

ENJOY.

Previous
Next Post »