GUIDE TO FLASH XIAOMI MI HM NOTE 1TD MT6592 TESTED FIRMWARE
EXCLUSIVE IS FOR FREE
You need this firmware/stock rom if you have encountered this kind of problem in your Set Listed Below:
- Hang in logo
- Rebooting
- Bootloop
- Virus Apps
- Dead phone detected by pc
Remarque: Firmaware file contains
All needed partitions to do a correct software fix.
INFO:
- Brand : Xiaomi
- ProdName : lcsh92_wet_tdd
- ProdModel : HM NOTE 1TD
- Device : lcsh92_wet_tdd
- AndroidVer: 4.2.2
- MTKxCPU : MT6592
- MTKxPRJ : ALPS.JB9.MP.V1.4
- [Read Ok] : preloader_lcsh92_wet_tdd.bin
- [ScatCFG] : MT6592 / V1.1.2 / lcsh92_wet_tdd / EMMC
- FW Size : 856 MiB
FIRWARE & FLASH TOOL YOU WILL FIND IT IN THE NEXT LINKS:
password: www.firmwares-mobile.com
Remarque: dont copy paste without permisson
SP Flashtool Downloadlink: SPFlashTool 5.1628
Drivers Download Link: Mobile Mtk Drivers
How To Flash Via SP FLASHTOOL?
1-Requirements:
- A Computer PC Run Windows XP or above
- Usb data cable (not a generic cable)
- Mtk usb drivers installed manually, you will find instruction bellow
- Your Mtk Smartphone Face a soft issue
- Original stock rom (you can find it above in download section)
- The latest SP Flashtool version
2-How to install VCOM Drivers:- Open device manager from my PC or my computer.
- Click on any item and go to actions > Add legacy hardware
- Now, press next and select install drivers manually
- Press next and click on have disk
- from the browse option, select VCOM drivers From mtk drivers folder
- Once its done. You will see a screen similar to this:
- Once you are done with the driver installation, go to device manager > Ports (COM&LPT) you will find a device similar to this:
3-How to flash rom using SP Flashtool?:- Power the phone off, remove the battery from the smartphone and put it back without booting the phone (if the battery is inside then simply switch it off).
- Launch SP Flashtool
*Double clicks onFlash_tool.exe
*Press OK
- Click on scatter-loading option and browse to the scatter file of your stock rom choose MTxxxx_android.txt (scatter.txt).
- Dont touch any options, Keep the original setting (In case you want to format device before flash press choose format+download but it'snt recommanded because you will be ended with an EMEI null)
- If you phone is alive and has a software issue (contain virus, Stuck on logo, apps setting problem, blink, or not work as expected) I advise you to Uncheck Preloader as a precaution. On contarary check all pertitions if you have a boot problem (you phone does'nt boot when you try to power on it).
- Once you are done with everything, click on the download button at the top of the software.
Stop should now be prominent while other options should be grayed out- Connect your switched off phone with battery inside to PC via Usb cable
- A progressbar should start running
- In the end of an success flash process, a box should show up with green OK symbol inside
- Disconnect the phone, remove the battery, slot it back in then power the phone.
ENJOY.
This is dummy text. It is not meant to be read. Accordingly, it is difficult to figure out when to end it. But then, this is dummy text. It is not meant to be read. Period.